Control of 4/8 digital output channels or relays
The USB Digital Output Module is the control solution for digital lines. The USB Digital Output Module allows the generation of high/low signals as well as to control power consumers.
USB Digital Output Module options
|Solid State Relay Interface
||The optical and potential insulated outputs are realized by using solid state relays (SSR). The USB Relay Module with SSR provides the best overall capabilities and high protection level for controlling power loads like pumps, fans or heating elements by statically switching or by periodically pulsing. Each digital output is rated with 30 V and 0.75 A and can switch loads up to 22.5 Watt.
|SPDT Relay Interface
||Using the USB Relay Module with mechanical SPDT (C-Type) relay switches allows to switch power loads as well as to switch or toggle signals e.g. for measurements without distortion. Mechanical relays provide a very high protection level.
Please find here more information about the characteristics of the different USB IO Module outputs.
Digital Output operation modes
For most flexibility each of the 4/8 channels of the USB Digital Output Module can be configured on one of the following modes:
||Generates a digital output signal by setting the channels state directly.
||Generates a Pulse Width Modulation (PWM) by configuring cycle time and duty cycle.
This mode can be used in order to control the power of loads by pulsing them periodically.
||Generates a time sequenced output signal. Using this mode the USB Digital Output Module can be used to realize e.g. time switches.
Galvanic USB Isolation
All LucidControl USB IO Modules are available with galvanic USB isolation. Contact us for more information.
High speed output processing
The USB Digital Output Module provides functions which allow to access the outputs without direct interaction of the host computer. This allows a precise timing which would not be realizable if the host computer was involved.
Optical indication of digital output states
The state of each digital output is reflected by a LED
No Power Supply needed
All LucidControl are power supplied by USB and do not need additional power supply.
Easy installation of Hard and Software
LucidControl modules are easy to install and start working immediately after set up.
The IO Modules are compatible with Windows, Linux, Raspberry Pi and Beagle Bone
LucidControl provides drivers for all major operating systems. Command line tools and APIs for Windows and Linux are available. The API is ready for .NET, Java and Python.