The USB Digital Input Module is the acquisition and monitoring solution for 4 or 8 digital lines.
Digital input configuration and protection
All input lines of the USB Digital Input Module are carried out optical and potential insulated in order to protect the hardware and give higher flexibility in design.
Voltage levels of the digital inputs
The USB Digital Input Module is available for 3 different threshold input voltages of the ranges 5V, 10V and 24V in order to interface many different devices directly without conversion of input levels.
Selectable digital input and counting modes
In order to give most flexibility each of the 4 or 8 channels of the USB Digital Input Module can be configured on one of the following modes:
||Sampling a digital input signal and provide its conditioned and debounced state.
|Edge Detection Mode
||High speed Sampling of digital inputs and detecting rising or falling edges in real-time.
||High speed Counter for various signals providing different options in order to evaluate a wide range of pulses and sensors.
Signal conditioning and debouncing
Filters can be applied to each input channel in order to suppress erroneous signal states.
High sampling rate
Ensures signal detection without activity of the host computer which is crucial in order to ensure precise timing.
Optical indication of digital input state
The state of each digital input is reflected by a LED
No Power Supply needed
All LucidControl are power supplied by USB and do not need additional power supply.
Industrial ready Design
The housing of LucidControl can be directly mounted on Din-rails ready for switch board assembly.
Using industrial standard IO connectors ensures reliable interconnection.
Easy installation of Hard and Software
LucidControl modules are easy to install and start working immediately after set up.
The IO Modules are compatible with Windows, Linux, Raspberry Pi and Beagle Bone
LucidControl provides drivers for all major operating systems. Command line tools and APIs for Windows and Linux are available.