Outdated Information
This online document might be outdated. Please see the LucidControl USB Digital Output Module PDF documentation instead.
4 Specification
This section contains the technical specification of the LucidControl USB Digital Output Module and USB Relay Module
Parameter | Condition | Value | |
---|---|---|---|
Outputs | |||
No. of Output Channels | 4 | ||
Outputs – Electrical Characteristics | |||
Maximum Rated Load Current (Note1) | DO4-I | ISSRMax | 750 mA |
DO4-O | IOCMax | 750 mA | |
DO4-S | ISPDTMax | 750 mA | |
Maximum Rated Load Voltage | DO4-I | USSRMax | 30 V |
DO4-O | UOCMax | 30 V | |
DO4-S | USPDTMax | 30 V | |
Maximum On Resistance | DO4-I | RSSR | 0.25 Ω |
DO4-O | ROC | 0.5 Ω | |
DO4-S | RSPDT | 0.1 Ω | |
Insulation Resistance | DO4-S | 1 GΩ | |
Insulation Voltage | DO4-I | 1,000 V | |
DO4-S | 400 V AC for 1 minute | ||
Outputs – Timing Characteristic | |||
Minimum Resolution tRes | DO4-I | 10 ms | |
DO4-O | 0.1 ms | ||
DO4-S | 100 ms | ||
TCycle, TOnDelay, TOnHold | tres ≤ T ≤ 3,600 s | ||
Module – Host Interface | |||
USB | 2.0 Full Speed CDC Profile | ||
Power Supply | USB Bus Powered with +5V No additional Power Supply needed |
||
Maximum Rated Current | DO4-I | 40 mA | |
DO4-O | 40 mA | ||
DO4-S | 250 mA | ||
Module – Environment | |||
Temperature | Storage | -20 °C … +70 °C | |
Operation | 0 °C … +55 °C | ||
Humidity | < 85 % RH, non-condensing | ||
Module – Housing | |||
Dimensions L x W x H | 90 x 54 x 62 mm | ||
Weight (in total) | 120 g | ||
Assembly | Rail-Mount (EN 50022, TS35) | ||
Protection Class (DIN 40050) | IP20 | ||
Module – Indicators | |||
Operation and Status Indicator | |||
Communication Indicator | |||
Indicator for Output State (Enabled / Disabled) | |||
Software | |||
Supported Operating Systems | Windows® XP, Windows® Vista, Windows® 7 Ubuntu, Debian, Raspbian |
||
Application Programming Interface (API) | Console / Terminal Application Java and Python |
Note1
Outputs are able to control resistive loads only. For inductive loads a flyback diode is required.
[hr/]
[one_third first]
Previous Chapter:
3 Module Operation
–
[/one_third]
[one_third]
LucidControl USB Digital Output Module and USB Relay Module Content
[/one_third]
[one_third]
Next Chapter:
5 Order Information
[/one_third]
Leave a Reply
Want to join the discussion?Feel free to contribute!