Documentation LucidControl USB Digital Input Module

This online document might be outdated. Please see the LucidControl USB Digital Input Module PDF documentation instead.

This section contains the technical specification of the LucidControl USB Digital Input Module.

Parameter	Condition	Value
Inputs
No. or Input Channels		4
Input – Electrical Characteristics
Input Signal Maximum Low Level	5V	U_05MaxLow	2.5 V
	10V	U_10MaxLow	6.0 V
	24V	U_24MaxLow	16 V
Input Signal Minimum High Level	5V	U_05MinHigh	3.5 V
	10V	U_10MinHigh	8.0 V
	24V	U_24MinHigh	19 V
Maximum Input Voltage		U_Max	30 V
Maximum Reverse Input Voltage		U_RMax	-30 V
Input Impedance		R_In	> 1kΩ
Insulation Resistance		> 1GΩ
Insulation Voltage		5000 V for 1 minute
Input – Timing Characteristic
T_Scan		t_min ≤ T_Scan ≤ 1 s
T_Count		1 ms ≤ T_Count ≤ 1 h
Minimum pulse length		t_Min	80 µs
Maximum Frequency of Input Signal in Count Mode	DC 50%	6,000 Hz
Maximum Frequency of Input Signal in Count Mode	20% < DC < 80%	2,500 Hz
Module – Host Interface
USB		2.0 Full Speed CDC Profile
Power Supply		USB Bus Powered with +5V No additional Power Supply needed
Maximum Rated Current		40 mA
Module – Environment
Temperature	Storage	-20 °C … +70 °C
Temperature	Operation	0 °C … +55 °C
Humidity		< 85 % RH, non-condensing
Module – Housing
Dimensions L x W x H		90 x 54 x 62 mm
Weight (in total)		120 g
Assembly		Rail-Mount (EN 50022, TS35)
Protection Class (DIN 40050)		IP20
Module – Indicators
Operation and Status Indicator
Communication Indicator
Indicator for Input State (Enabled / Disabled)
Software
Supported Operating Systems		Windows® XP, Windows® Vista, Windows® 7 Ubuntu, Debian, Raspbian
Application Programming Interface (API)		Console / Terminal Application Java and Python

[hr/]

[one_third first]
Previous Chapter:
3 Module Operation
–
[/one_third]

[one_third]
Next Chapter:
5 Order Information
[/one_third]

Documentation LucidControl USB Digital Input Module – Device Specification